OUKANING Electric Bike Motor Kit 48V 1000W 36V 250W Electric Bike Conversion Kit Front/Rear Wheel Powerful Motor Electric Bike Conversion Kit for 20″ Bike
Please be aware:
1. When connecting the controller to the wires, remember to join the proper colours to the controller. Otherwise, the controller could also be damaged.
2. 20″ refers to the diameter after the tire is installed, this item does not include tires, which need to be purchased by the customer.
3. It is used to install 20 inch tires and is suitable for 20 inch bicycles. Please check the product size before purchasing.
About the battery:
The power and voltage of the battery (not included) you buy must be compatible with our set. When installing, make sure the wiring is not reversed. Otherwise, it may damage the product.
1. 36V 250W/48V 1000W Brushless gear motor specifications, strong and powerful.
2. Come with powerful controller guarantee large current supply.
3. Suitable for both V brake and disc brake.
4. Front fork open size is 100mm
Rear fork open size is 135mm
5. Thumb throttle
6. Crank speed sensor for pedal assist.
Optional Type: Front Motor/Rear Motor
Motor specification: 36V 250W / 48V 1000W.
Speed: 30 KM/H / 50 KM/H
Front Fork Open Size: Approx. 100mm / 3.9in
Rear Fork Open Size: Approx. 135mm / 5.3 inch
Brake: V-brake/disc brake
Controller: 36V 15A / 48V 30A
Assistance: 5-point magnetic assistance sensor
Brake Lever: Power Cut Brake Lever
Accelerator: thumb throttle
Display: SW-810LED display
Wiring mode: waterproof wire for outgoing motor, common wiring for others
List of packages:
1 x electronic power brake
1 x thumb throttle
1 LED screen.
1 x waterproof wire
1 x Controller Carrying Case
【High Performance】Come with a powerful controller guaranteeing large current supply. Suitable for both V brake and disc brake. The maximum engine speed will be 30km/h. The open size of the front fork is 100mm. Thumb throttle. The rim size is 20″ (appropriate for a 20 inch bike). Crank pace sensor for pedal help.
【Main Parameters】Optional Type: Front Motor; Motor Specification: 36V 250W; Speed: 30km/h; Front Fork Open Size: Approx. 100mm / 3.9in; Brake: V-brake/disc brake; Controller: 36V 15A; Assistance: 5-point magnetic help sensor; Brake Lever: Power Cut Brake Lever; Throttle: thumb throttle; Display: SW-810LED show.
【Note】This equipment doesn’t embrace tires, which should be bought by the shopper. It is used to put in 20 inch tires and is appropriate for 20 inch bicycles. Please test the product measurement earlier than buying. When connecting the controller to the wires, remember to join the proper colours to the controller. Otherwise, the controller could also be damaged.
【Complete Conversion Kit】Electric bike conversion equipment for 20” entrance wheel, consists of all parts wanted for set up. Package consists of: 1 motor, 1 controller, 1 help, 1 electrical brake, 1 thumb throttle, 1 LED show, 1 waterproof wire, 1 controller carrying case.